Catch a down device before it takes down the site
Monitor every router, switch, firewall, and link from one place, so you find the failing device and the reason behind it before your users feel it. One agent covers a whole site, with nothing installed on the hardware.
A green switch doesn't mean the link is up.
KloudMate polls each device over SNMP, monitors the sites that can't answer, and reads the traffic crossing every link, so a flapping uplink, an errored interface, and the app eating the bandwidth all surface in one place instead of three tools.
What teams can do with Network Monitoring
Poll devices, receive their traps, ping the sites that can't answer, and read the traffic, all from the same agent.
Poll any SNMP device
Interface throughput and errors, CPU, memory, uptime, and vendor health over SNMP v1, v2c, or v3. Built-in profiles cover Cisco, Juniper, Arista, Fortinet, Palo Alto, MikroTik, and more.
Receive SNMP traps, not just polls
Every device pushes its SNMP traps to one agent, so a link flap or PSU failure reaches you between polls. Route trap events into Incident Management for on-call paging and escalation.
Catch the sites that can't speak SNMP
A gateway-and-internet ping pair shows whether the local network is up and whether the ISP link is working, so a branch outage still surfaces.
Read the traffic on every link
Listen for NetFlow, IPFIX, or sFlow to see the per-application byte and packet mix, then turn on raw flow logs to rank the top talkers.
Discover what's on the network
Scan an IP range and monitor whatever answers, so a device someone racked and forgot doesn't stay invisible.
Map links and routing
Draw the topology from LLDP and CDP neighbours, and monitor BGP peers, MPLS VRFs, and IP SLA probes where you run them.
From a device down to the link that caused it
The Network page leads with problems, not a wall of green, so you start at what's wrong and drill to the interface behind it.
Install one agent per site
A Linux or Docker agent polls devices over the network, so nothing runs on the routers and switches themselves.
Add devices or scan for them
Point the guided SNMP wizard at known devices, or scan an IP range and monitor whatever answers.
Read the Overview at a glance
Health tiles count what's down, a live feed lists problems worst-first, and a status board groups devices by site, role, or vendor.
Drill into the device
Open a device for its interfaces, routing, and traffic, sorted so the down ports and errored links surface first.
See what's actually on the wire
SNMP tells you how much traffic crosses an interface, not what it is. Point your devices' flow export at the agent and KloudMate breaks the load down by application, so a saturated link and the app filling it sit side by side.
- Listen for NetFlow, IPFIX, and sFlow, and classify each flow into per-application byte and packet counts
- Every flow ties back to the SNMP device that exported it, so utilization and its cause stay together
- Turn on raw flow logs to rank the top talkers by source, destination, and conversation
Follow the fault down the link path
The Topology tab draws a live link map from LLDP and CDP neighbour data. A down endpoint reddens its links, so the fault path stands out instead of hiding in a table.
- Devices are nodes and neighbour links are edges, both in the same status colors as the Overview
- A failed uplink or ISP link surfaces as an unreachable gateway or a down uplink, not a silent gap
- Down and not-reporting stay distinct, so you know whether the device died or the poller did
Poll every device without touching the hardware
One agent polls an entire site over the network, so you monitor routers, switches, firewalls, and PDUs without installing anything on them. When the Overview flags a device, the searchable table is where you drill in.
- SNMP v1, v2c, and v3 with built-in profiles for Cisco, Juniper, Arista, HPE, Aruba, Dell, Fortinet, Palo Alto, MikroTik, F5, and APC
- Filter by vendor, site, or status, and sort by any column to find the device you need
- A poller-not-reporting banner names the offline agent instead of marking every device it watched as down
Ask KloudMate Assistant to explain what the network did
Assistant turns a wall of interface counters and flow records into a plain answer about which device changed first, which link is saturated, and where to look next.
- Summarize Say which device or link degraded first
- Correlate Tie an errored interface to the traffic it carries
- Guide Point to the next device, interface, or flow to inspect
Related Features
Keep the rest of the workflow close by so teams can move between detection, investigation, and response without losing context.
Infrastructure Monitoring
Monitor hosts, Kubernetes, Prometheus, and cloud resources with linked application context.
Learn moreAPM & Distributed Tracing
Trace requests across services, inspect dependencies, and move from latency symptoms to request-level evidence.
Learn moreAlerting
Correlate related alerts into one incident with AI, notify the right team once, and attach a likely cause automatically.
Learn moreIncident Management
Coordinate response, ownership, escalation, and telemetry context in one incident workflow.
Learn moreGet started
From telemetry to root cause,
in one platform.
Connect your OpenTelemetry pipeline, AWS integrations, or eBPF agent. Distributed tracing, log management, alerting, and AI-assisted investigation: unified, with predictable pricing.